G10 DualTec Officer Length SLIM Semi-Aggressive

G10 DualTec Officer Length Slim Semi-Aggressive Grips ONLY Slotted for Techwell System

Roughly 1/3 Slimmer then Standard Grips! This Dual Pattern G10 Grip model offers a combination of the semi-aggressive DrillTec pattern in front where you draw, and angled ridges found on the DiagTec in the rear to help keep the hand high on the gun.

Cut for ambi safeties; panels conceal the mainspring housing pin.

Grip screws not included.

** IMPORTANT NOTE: If you are installing Slim Grips on a frame which did not originally come equipped with them, Slim Grip Bushings and Screws will have to be installed.

NEEDED FOR INSTALLATION:

• Slim Grip Bushings & Screws
• 1911 Slim Bushing Bits (Regular and Slim) or, (a distant second choice) a nice big screwdriver with a wide thick blade
• A ¼” Socket Driver for the Bushing Bits – unless you are using the distant second choice nice big screwdriver with a wide thick blade
• #242 Blue LocTite
• A certain level of technical skill is required to install this hardware, so, as with all firearm modifications, we suggest that you seek the services of a professional gunsmith if you have any doubts or questions.

SPECS: Machined G10 Grips Panels – 1.2 oz. Fits OFFICER LENGTH (Compact) 1911 Pistols.